Bravo 20-2 Electric Kite / SUP / Inflatable Pump – 25% Off

Scoprega’s Bravo 20-2 electric pump is a newly upgraded model for 2019 that features a larger dual motor for faster and more efficient inflation of Kites, inflatable paddle boards, boats, kayaks, rafts, dinghies, tubes, toys, and more.

The Bravo Pump In Action:

What Jeff Says:

Twin-cylinder, single-stage pump fills quickly and to higher pressure than most electric pumps on the market. An easily-selectable pressure dial indicator lets you choose the PSI and automatically shuts-off when the desired pressure is reached. The pump houses an internal, rechargeable battery that can be easily trickle-charged using the included wall charger. If the battery is drained but you still want to pump something, the pump can be run from other 12V power sources such as a car battery using the included power cable with alligator clips.

The heavy-duty hose comes with several different sizes and types of adapters for compatibility with H3 SUP valves, 9mm kite inflate valves, and Boston screw valves (commonly found on kites and many air mattresses). The pump hose comes with a kite leash to hold your kite while it is being inflated. Easily carry the pump and all accessories in the bag with the shoulder strap or just take the pump using the pump’s convenient handle.

The Bravo 20-1 Electric Pump has mainly an internal change to the piston and rod pumping group to make it more efficient and faster than the Bravo 20.

Features:

•  Portable, high-efficiency, and low-noise electric pump in an all-in-one convenient package
•  Pumps up to 22 PSI (1.5 Bar) with wide pressure range selectable by easy analog dial indicator (about 2-4 inflatable SUP to 12 PSI or 15-20 kites to 6 PSI before recharging)
•  “Set it and Forget it” automatic shut-off at the selected pressure
•  Twin cylinder, single-stage pump fills quickly and to higher pressure than most electric pumps
•  Internal, rechargeable 12 volt battery
•  Easily recharge the battery with the included wall charger
•  Included 12 volt power cable with alligator clips can run the pump from other sources like a car battery if the internal battery is drained
•  Heavy duty hose with several types of adapters: H3 SUP (Stand Up Paddleboard Halkey Roberts), SUP ring with 7 assorted adapter sizes, 9mm kite, and Boston screw valve
•  Automatic thermal shut off if overheating (~15-20 minutes of continuous usage, cool-down time 20-30 minutes before re-use)
•  LED battery indicator
•  Easy carry shoulder strap
•  Kite leash holds your kite while pumping

Specs:

• Max Pressure: 22 PSI (1.5 bar)
• Air Flow: 125 liters/minute
• Power Supply: Internal 12 volt battery or using included alligator clips for direct connection to external 12 volt battery
• Charging: Internal 12 volt battery can be trickle charged with included wall charger (110-240V)
• Pump – Dimensions: 8.6″ x 12.6″ x 8.6″ (22 x 32 x 22cm), weight: 9.9 pounds (4.5 kg)
• Pump and all accessories in bag – Dimensions: 13″ x 11″ x 9″ (33 x 28 x 23cm), weight: 14 pounds (6.4 kg)

Note: Please keep the battery charged when not in use to prolong battery life. The first charge may take as long as 6-10 hours to fully charge the battery. To store the pump for a long period of time without it being used, charge the battery to full and remove the fuse from the back of the pump.